Bars:
Fusible Alloys, High Purity Indium Bars, Indium Alloy Bars, Pure Indium Bars, Pure Metal Bars (Non Indium), Wave Solder Bars
-
117°F EutecticIPN: Ingotbn-05117-5lbIG
Price: $750.00
Typical Properties:
#117 Alloy
Eutectic Alloy
Liquidus: 117F - 47C
Solidus: 117F - 47C
Yield Temperature: 117F
Weight: 0.32 lb/in3
Tensile strength: 5.4 ksi
Slow-load elongation: 1.5%
Brinell hardness: 12
Specific Heat
Liquid: 0.035 Btu/lb-F
Solid: 0.035 Btu/lb-F
Latent heat of fusion: 6Btu/lb
Coefficient of thermal expansion: 14
Electrical conductivity: 3.9% Cu
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures.
Fusible alloys are materials that melt at less than 300F, well below the melting point of Tin-lead eutectic solders. The major component of fusible alloys is bismuth. Besides producing low melting point, bismuth also gives these materials the unique characteristic of expanding on freezing. This expansion, which can continue for hours or even days after freezing, has proven to be a useful property in many processes.
Fusible Alloys are classified as either eutectic or non-eutectic. In eutectic alloys, the melting point coincides with the freezing point. Non- eutectic alloys exhibit a range between the melting and freezing point in which the material is "mushy" or "pasty".
Fusible Alloys are used for lens blocking and tube bending, for anchoring chicks and fixtures and for mounting thin sections such as gas turbine blades for machining. The eutectic fusible alloys, which can be tailored to give s specific melting point, find applications in temperature control devices and in fire protection devices. Details… -
136°F EutecticIPN: Ingotbn-05136-2.5lbIG
Price: $545.00
Typical Properties:
#136 Alloy
Eutectic Alloy
Liquidus: 136F - 58C
Solidus: 136F - 58C
Yield Temperature: 136F
Weight: 0.31 lb/in3
Tensile strength: 6.3 ksi
Slow-load elongation: 50%
Brinell hardness: 14
Specific Heat
Liquid: 0.032 Btu/lb-F
Solid: 0.032 Btu/lb-F
Latent heat of fusion: 8Btu/lb
Coefficient of thermal expansion: 13
Electrical conductivity: 3.0% Cu
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures.
Fusible alloys are materials that melt at less than 300F, well below the melting point of Tin-lead eutectic solders. The major component of fusible alloys is bismuth. Besides producing low melting point, bismuth also gives these materials the unique characteristic of expanding on freezing. This expansion, which can continue for hours or even days after freezing, has proven to be a useful property in many processes.
Fusible Alloys are classified as either eutectic or non-eutectic. In eutectic alloys, the melting point coincides with the freezing point. Non- eutectic alloys exhibit a range between the melting and freezing point in which the material is "mushy" or "pasty".
Fusible Alloys are used for lens blocking and tube bending, for anchoring chicks and fixtures and for mounting thin sections such as gas turbine blades for machining. The eutectic fusible alloys, which can be tailored to give s specific melting point, find applications in temperature control devices and in fire protection devices. Details… -
158°F EutecticIPN: Ingotbo-05158-3.75lbIG
Price: $262.50
Typical Properties:
#158 Alloy
Eutectic Alloy
Liquidus: 158F - 70C
Solidus: 158F - 70C
Yield Temperature: 158F
Weight: 0.339 lb/in3
Tensile strength: 5.99 ksi
Slow-load elongation: 200%
Brinell hardness: 9.2
Specific Heat
Liquid: 0.040 Btu/lb-F
Solid: 0.040 Btu/lb-F
Latent heat of fusion: 14Btu/lb
Coefficient of thermal expansion: 12
Electrical conductivity: 4.0% Cu
Fusible Alloys include a group of binary, ternary, quaternary, and quinary alloys containing Bismuth, lead, tin, cadmium and indium. The term fusible alloy refers to any of the more than 100 white-metal alloys that melt at relatively low temperatures.
Fusible alloys are materials that melt at less than 300F, well below the melting point of Tin-lead eutectic solders. The major component of fusible alloys is bismuth. Besides producing low melting point, bismuth also gives these materials the unique characteristic of expanding on freezing. This expansion, which can continue for hours or even days after freezing, has proven to be a useful property in many processes.
Fusible Alloys are classified as either eutectic or non-eutectic. In eutectic alloys, the melting point coincides with the freezing point. Non- eutectic alloys exhibit a range between the melting and freezing point in which the material is "mushy" or "pasty".
Fusible Alloys are used for lens blocking and tube bending, for anchoring chicks and fixtures and for mounting thin sections such as gas turbine blades for machining. The eutectic fusible alloys, which can be tailored to give s specific melting point, find applications in temperature control devices and in fire protection devices. Details… -
1kg 99.9% In IngotIPN: Ingotic-05376-1kIG
Price: $792.50
Typical Indium Analysis
99.9%
PPMWT
Fe : 10-20
Ni : 5-20
Cu : 5-30
Cd : 50-100
Pb : 200-300
Sn : 50-200
Ti : 100-300
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
1kg 99.99% In IngotIPN: Ingotic-05373-1kIG
Price: $810.00
Typical Indium Analysis
99.99%
PPMWT
Fe : 1-2
Ni : 2-6
Cu : 2-6
Cd : 5-10
Pb : 10-30
Sn : 10-25
Ti : 1-4
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
1kg 99.999% In IngotIPN: Ingoti5-05374-1kIG
Price: $845.00
Typical Indium Analysis
99.999%
PPMWT
Fe : 0.5
Ni : 1.0
Cu : 1.0
Cd : 1.0
Pb : 2.0
Sn : 2.5
Ti : 1.0
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
1lb 90In 10Sn Alloy BarIPN: Ingotia-05538-1lbIG
Price: $489.09
Indium-tin alloys are useful where lower temperatures are required to protect heat-sensitive components and substrates. The indium-tin eutectic with a sharp melting point has excellent wettability on nonmetallic materials. It also has good low-temperature malleability and compensates for some difference in the coefficients of thermal expansion of dissimilar metals. The addition of either metal to the other increases the corrosion resistance of the resulting alloy.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
1lb 91In 9Sn Alloy BarIPN: Ingotia-05887-1lbIG
Price: $360.23
Indium-tin alloys are useful where lower temperatures are required to protect heat-sensitive components and substrates. The indium-tin eutectic with a sharp melting point has excellent wettability on nonmetallic materials. It also has good low-temperature malleability and compensates for some difference in the coefficients of thermal expansion of dissimilar metals. The addition of either metal to the other increases the corrosion resistance of the resulting alloy.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
500g 99.9% In IngotIPN: Ingotic-05376-500gIG
Price: $0.87
Typical Indium Analysis
99.9%
PPMWT
Fe : 10-20
Ni : 5-20
Cu : 5-30
Cd : 50-100
Pb : 200-300
Sn : 50-200
Ti : 100-300
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
500g 99.99% In IngotIPN: Ingotic-05373-500gIG
Price: $0.88
Typical Analysis
99.99% Indium
PPMWT
Fe : 1-2
Ni : 2-6
Cu : 2-6
Cd : 5-10
Pb : 10-30
Sn : 10-25
Ti : 1-4
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
500g 99.999% In IngotIPN: Ingoti5-05374-500gIG
Price: $0.92
Typical Indium Analysis
99.999%
PPMWT
Fe : 0.5
Ni : 1.0
Cu : 1.0
Cd : 1.0
Pb : 2.0
Sn : 2.5
Ti : 1.0
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements. Details… -
Indium Bar 6n min 1kgIPN: Ingoti6-05375-1kIG
Price: $1310.00
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost. Details…
-
Indium Bar 6n min 500gIPN: Ingoti6-05375-500gIG
Price: $1.92
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost. Details…
-
Indium Bar 6n5 min 1kgIPN: Ingoti6-05816-1kIG
Price: $1410.00
This purity is especially suited for the production of single crystal III-V compound semiconductors, such as indium Phosphide used as substrates for fabrication of integrated circuits or discrete devices such as laser diodes and photo detectors. Certification of 6N5 purity is by OES (optical emission spectroscopy) with GFAA (graphite furnace atomic absorption) being used for quantitative analysis of selected elements. Details…
-
Indium Bar 6n5 min 500gIPN: Ingoti6-05816-500gIG
Price: $2.01
This purity is especially suited for the production of single crystal III-V compound semiconductors, such as indium Phosphide used as substrates for fabrication of integrated circuits or discrete devices such as laser diodes and photo detectors. Certification of 6N5 purity is by OES (optical emission spectroscopy) with GFAA (graphite furnace atomic absorption) being used for quantitative analysis of selected elements. Details…
-
Indium Bar 6n5 WCI 1kgIPN: Ingoti6-05989-1kIG
Price: $1860.00
Our 6N5WCI (with controlled impurities) indium is refined for use in critical bulk crystal growth and in epitazial processes including molecular beam (MBE), liquid phase (LPE), and vapor phase (VPE) epitazy 6N5WCI is tailored for applications requiring the stringent control of impurities which, until now, only a 7N purity level may have provided at higher cost. This is accomplished by holding total metallic impurities to less than 500 ppb/weight (by GDMS), with particular attention given to maintaining low levels of elements known to be detrimental to III-V device performance. Details…
-
Indium Bar 6n5 WCI 500gIPN: Ingoti6-05989-500gIG
Price: $2.42
"Our 6N5WCI (with controlled impurities) indium is refined for use in critical bulk crystal growth and in epitazial processes including molecular beam (MBE), liquid phase (LPE), and vapor phase (VPE) epitazy 6N5WCI is tailored for applications requiring the stringent control of impurities which, until now, only a 7N purity level may have provided at higher cost. This is accomplished by holding total metallic impurities to less than 500 ppb/weight (by GDMS), with particular attention given to maintaining low levels of elements known to be detrimental to III-V device performance." Details…
-
Sn62.5/Pb36/Ag1.5 Wave Solder BarIPN: Ingotot-05104-500gIG
Price: $250.00
Indium Corporation of America's bar solder is a high purity material manufactured to provide consistent and reliable performance. Details…
-
Sn63/Pb37 Wave Solder BarIPN: Ingotot-05106-500gIG
Price: $250.00
Indium Corporation of America's bar solder is a high purity material manufactured to provide consistent and reliable performance. Details…